Home | About LMW | Investor Relations | Textile Machinery | Machine Tools | Foundry | News | Sitemap
About MTD
Plant Visit
User Profile
Group Synergies
Travel Guide
Product Range
Product Enquiry
CNC Lathes
Rigi 15 - Specifications:
Title | Description | RIGI 15 |
Capacity | Swing over Bed, diameter | 190 mm ( 7.48" ) |
Chuck diameter, maximum | 165 mm ( 6" ) | |
Bar capacity, diameter maximum | 34 mm ( 1.34" ) | |
Admit between centres | 210mm ( 8.27" ) |
|
Turning length*, maximum | 145mm ( 5.71" ) | |
Spindle | Spindle Nose | A2-5 |
Spindle speed range, rpm, std (opt) | 90-4500 ( 120-6000 ) | |
Constant power speed range, rpm: std. (opt) | 1125-3375 ( 1500-4500 ) | |
Spindle motor power AC ( 30 minutes ) | 7.5kW ( 10 hp ) | |
Height of Spindle centre from floor | 1050 mm ( 41.34" ) | |
Feed System | Rapid traverse rate - Z axis | 15 m/min ( 591 ipm ) |
Rapid traverse rate - X axis | 10 m/min ( 393 ipm ) | |
Turret | Number of tool stations | 8 |
Tool shank, standard | 20 x 20 mm ( 0.79" x 0.79" ) |
|
Boring bar diameter, standard | 25 mm ( 1" ) | |
Tailstock | Quill diameter / stroke | 40 mm / 70 mm ( 1.57" / 2.75" ) |
Quill taper | MT3 | |
CNC System | Controller | Fanuc 0T |
Installation Data | Length | 1990mm ( 78.35" ) |
Depth | 1435mm ( 56.50" ) | |
Height | 2060mm ( 81.10" ) | |
Weight | 2300 kg ( 5071 lb ) |
* - ( Depends upon work holding equipment: check moving range diagram)
NA - Not available
Inch dimensions are near equivalent of metric data.
CNC Lathes |
Vertical Machining Centres | Horizontal Machining Centres | Tool Room Milling Machine | Drill Tap Centre